MoBE-RTES 2010 (in conjunction with ISORC 2010) IEEE International Workshop on Model-Based Engineering for Real-Time Embedded Systems Design



MoBE-RTES 2010 (in conjunction with ISORC 2010) IEEE International Workshop on Model-Based Engineering for Real-Time Embedded Systems Design

From: Huascar Espinoza <Huascar.Espinoza_at_esi.es>
Date: Wed, 23 Dec 2009 15:06:47 +0100
Message-ID: <9E617922B8B1C84AB333BE8A3CBA99751CBB93@perseo.esi.es>
 
-------------------------------------------
Call for papers for the *IEEE International Workshop on Model-Based Engineering for Real-Time Embedded Systems Design* (MoBE-RTES 2010) In conjunction with IEEE ISORC 2010 International Symposium
 
Supported by the ARTISTDesign Network of Excellence and CEA LIST, Center of Nuclear Energy
-------------------------------------------
 
*DOMAIN*
 
Model-Based Engineering (MBE) is evolving into a fully-fledged engineering discipline, with well-established standards, industrial-strength tools, and emerging theoretical foundations.
Models are being used to specify the artefacts, structure, and behaviour of complex and mission-critical systems in various domains.
MBE provides the ability to, design, analyze, validate, and implement such systems using much higher levels of abstraction and computer-based automation than traditional approaches to software development. One of the most challenging domains for which MBE is a natural fit is the development of Real-time and Embedded Systems (RTES). The focus of this workshop is identifying the critical challenges in the RTES domain and how MBE techniques and standards can be used to overcome them.
Special focus is given (but not limited) to the following topics:
* MARTE (Modeling and Analysis of Real-time and Embedded systems), The
OMG standard for real time embedded systems: e.g. feedbacks on test cases, on-going work, tutorial
* MBE for Flexibility in embedded systems
* Tools that support model-based development of real-time and embedded systems
* Model-Based Safety Engineering: e.g. How we can specify safety
attributes in an architectural model, how we can guarantee that a real-time embedded system is safe
* MBE Industrial Feedback
 
-------------------------------------------
*OBJECTIVE*
 
The primary objective of the workshop is to bring together experts, researchers, and practitioners, from the embedded and real-time systems community as well from other relevant disciplines (e.g., hardware and systems designers), who are interested in the industrial application of MBE to embedded systems.
In addition, by means of one or more invited presentations, the intent is to provide an overview of the state of the art and the state of the practice of applying MBE to embedded systems development.
 
-------------------------------------------
*Important dates:*
 
* Submission of abstracts: 4 February 2010
* Submission of papers: 8 February 2009
* Acceptation: 1 March 2010
* Full paper final version: 15 March 2010
* Workshop: 4 May 2010
 
-------------------------------------------
*Organizing committee:*
 
* Reda Bendraou, Université de Paris 6, France
* Daniela Cancila, CEA LIST, France
* Huascar Espinoza, ESI-Tecnalia, Spain
 
-------------------------------------------
*Steering committee:*
 
* Sébastien Gérard, CEA LIST, France
* Fabrice Kordon, Université de Paris 6, France
* Bran Selic, Malina Software Corp., Canada
 
-------------------------------------------
*Program committee* (to be confirmed):
 
Julio Medina (University of Cantabria, Spain) 
Sergio Campos (ESI Tecnalia, Spain)
Roberto Passerone (University of Trento, Italy) 
Bran Selic(Malina SW & Carleton Univ, Canada)
Arnaud Cuccurru (CEA LIST/LISE, France) 
Antonio Vallecillo (University of Malaga, Spain)
Dorina Petriu (Carleton University, Canada) 
Richard Page (University of York, UK)
Vincenzo Manni (Rina, Italy) 
Sébastien Gérard (CEA LIST, France)
Kleanthis Thramboulidis(Electrical & Computer Engineering, Greece) Eugenio Villar (Universidad de Cantabria, Spain)
Daniela Cancila (CEA LIST, France) 
Huascar Espinoza (ESI, Spain)
Reda Bendraou (Université de Paris 6, France) 
Fabrice Kordon(Université de Paris 6, France) Javier Fernandez-Briones (Departamento de Ingeniería de Sistemas Telemáticos ETS de Ingenieros de Telecomunicación Universidad Politécnica de Madrid ) Pedro Silva (Departamento de Ingeniería de Sistemas Telemáticos ETS de Ingenieros de Telecomunicación Universidad Politécnica de Madrid )
Vahid Garousi (University of Calgary, Canada) 
João Paulo Andrade Almeida (Federal University of Espírito Santo, Brazil)
Jean Michel Bruel (University of Toulouse, France) 
Bernhard Rumpe(RWTH Aachen University)
Yves Bernard (Airbus) 
Nicolas Roquette (JPL, NASA) 
Douglas Schmidt (Vanderbilt University, USA)
 
-------------------------------------------
*Author's information*
 
*Submission format:*
 
* Scientific Papers: 6 pages
* PDF format, IEEE double column
* Industrial Proposal: 1-2 page
* Pannel proposal: 1-2 page
 
*Publication:*
 
Each accepted scientific paper will be published in the IEEE Workshop Proceedings. The proceedings will be provided in DVD format to each participant. A hardcopy of the proceeding will be sent to participants at a later time. Each paper must be presented at the workshop by one of the authors.
 
----
 
Huascar Espinoza, PhD
Embedded System R&D Area
European Software Institute (ESI)
Tecnalia - Technology Corporation
Parque Tecnológico #204
E-48170 Zamudio,
Bizkaia - Spain 
Tel.: +34-94 420 95 19
Fax: +34-94 420 94 20
URL: www.esi.es <http://sn123w.snt123.mail.live.com/mail/www.esi.es> 




**********************************  DISCLAIMER *******************************

This message may contain confidential, proprietary or legally privileged information. 
If you are not the intended recipient of this message, please notify it to the sender and delete without resending or backing it, as it is legally prohibited.

**********************************  AVISO LEGAL ******************************

Este mensaje puede contener información confidencial, en propiedad o legalmente protegida.
Si usted no es el destinatario, le rogamos lo comunique al remitente y proceda a borrarlo, sin reenviarlo ni conservarlo, ya que su uso no autorizado está prohibido legalmente.
 
******************************************************************************
Received on Wed 23 Dec 2009 - 14:10:22 GMT